How to maintain the grass cutting machine regularly?

grass cutting machine

A lot of work is often done when using a grass cutting machine. If you want the machine can be used for a long time, maintenance is essential, today mainly to give you the maintenance procedures of the chaff cutter machine.

Maintenance of the blade of Taizy grass cutting machine

Check the connection between the blade and the connecting sleeve regularly, and when the blade hits other objects during use, it should be checked in time.

When grinding the blade, the original angle and direction of the blade should be followed, the amount of sharpening on both sides should be ensured to be equal, and static balance should be done after sharpening.

Before reinstalling the blade, apply some lubricating oil on the surface of the crankshaft end and the inner hole of the connecting sleeve, and also apply some in the center screw bolt and the crankshaft screw hole to prevent rust and corrosion from disassembly in the future.

If not used for a long time, the surface of the blade should be cleaned and coated with a lubricant to prevent rust and corrosion.

Maintenance of the shell of the chaff cutter machine

The interior of the casing must be cleaned after each use to prevent rust and corrosion from being caused by clipped grass, leaves, sludge, or other debris adhering to its key part.

Other regular maintenance for Taizy grass cutting machine

Weeds, debris or dust should be removed from the shield daily to prevent engine damage due to overheating or overspeeding.

Under normal conditions, it should be cleaned once a day, and when used in a very dirty environment, it needs to be cleaned every few hours.

When not in use for a long time, you should pay attention to the diesel fuel in the grass cutting machine (if you use the motor model, there is no need to worry about it) and be careful of diesel fuel clogging.

Product
Case show
Share to:
Facebook
Twitter
LinkedIn
Pinterest
Reddit
Tumblr
WhatsApp
Skype
Email